A South African wellness oil producer needed to fill 30 ml and 50 ml glass dropper bottles accurately and hygienically, with each bottle sterilised first. We supplied a filling, capping and labelling line with a UV sterilisation tunnel that runs at 25 bottles a minute and is in stable production.
The customer produces viscous oils for health and wellness products. The oil is viscous, it goes into small glass dropper bottles, and it has to be dosed precisely and handled hygienically.
The customer needed filling, capping and labelling in one line, with the bottles sterilised before filling.
Distillate had to be filled accurately into 30 ml and 50 ml bottles.
Glass bottles had to be sterilised before filling and handled hygienically.
The line had to fill, cap and label at 25 bottles a minute.
We supplied a complete line rather than a single filler: a UV sterilisation tunnel, a dropper bottle filler matched to the viscous distillate, an automatic capper and a labeller. The filler was chosen after the customer's bottles and product were tested for viscosity and filling behaviour.
Bottles pass through the UV tunnel, are filled, capped and labelled, and leave the line ready for packing.
| Line | UV tunnel, filler, capper, labeller |
| Bottles | 30 ml and 50 ml glass dropper bottles |
| Product | Wellness oil, viscous |
| Output | 25 bottles a minute |
| Sterilisation | UV tunnel before filling |
The line was matched to the bottle and the product before it was ordered, then tuned once the recipe changed.
The customer supplied dropper bottles for testing.
The distillate's viscosity and filling behaviour were reviewed.
We recommended the filler configuration and the full filling, capping and labelling line.
The line was installed and commissioned in South Africa.
A recipe change meant the product had to be heat filled, so the line was adjusted for it.
The line is installed, commissioned and in stable production. The customer confirmed it is running well after minor tuning for the change in viscosity and heat filling.
30 ml and 50 ml dropper bottles run on the same line.
A UV tunnel treats every bottle before it is filled.
The line was tuned for heat filling and runs in stable production.
The first clip shows a dropper bottle filling line like the one supplied. The playlist and the machine videos page show more.
Our YouTube playlist of bottle filling, capping and labelling machines.
Video demonstrations of every machine type we supply, filmed in the workshop and on site.
Start from your bottle, your product's viscosity and the output you need, as this project did.
Filling, capping and labelling machines for bottles of every size.
Every machine we supply that fills liquids, compared in one place.
Send us your bottles, your product and the output you need. We will test them and come back with a recommendation or quotation.