CASE STUDY · BEVERAGE

Beverage packer speeds up shrink wrapping with a tunnel first, then adds a sleeve sealer

A beverage packer needed faster, more consistent shrink wrapping without moving straight to a fully automatic line. We supplied a shrink tunnel used with hand sealing, which sped up packing compared with fully manual wrapping, and the customer later added a semi-automatic sleeve sealer to the tunnel.

L-bar sealer with shrink tunnel
A shrink tunnel like the one supplied
INDUSTRY
Beverage
PACK FORMAT
Shrink-wrapped packs, sealed by hand
MACHINE SUPPLIED
THE CUSTOMER

What the customer packs

The customer runs a beverage packing operation and was shrink wrapping by hand. As demand grew, it wanted faster, more consistent shrink packing while keeping manual handling where it suited the operation, and without the cost and complexity of a fully automatic line at the start.

THE PROBLEM

Why the customer did not go fully automatic at once

The customer needed more speed from shrink wrapping while keeping the first investment under control.

01

Too slow by hand

Fully manual shrink wrapping limited packing speed and consistency.

02

Not ready for full automation

A fully automatic line was more cost and complexity than the customer wanted at the first stage.

03

Room to grow

The setup had to allow automation to be added later.

THE MACHINE

The machine we supplied: a shrink tunnel used with hand sealing

We recommended a shrink tunnel combined with hand sealing because the tunnel shrinks every pack evenly and quickly while the operator keeps control of loading and sealing. It is a middle step between manual and fully automatic packing, and a sealer can be added to the tunnel later.

Shrink tunnel

Packs sealed in film by hand ride the tunnel conveyor through controlled heat, which shrinks the film tight around each pack.

SPECIFIED FOR THIS LINE
First stageShrink tunnel with hand sealing
SettingsTemperature and conveyor speed set on site
Second stageSemi-automatic sleeve sealer added to work with the tunnel
HOW THE MACHINE WAS SPECIFIED

How the tunnel was set up

The shrink tunnel went into the customer’s existing packing area without major changes to the line.

01

Tunnel installed

The shrink tunnel was installed into the packing workflow.

02

Linked to hand sealing

The tunnel was set up to take packs from the manual sealing step.

03

Settings adjusted

Tunnel settings were adjusted for a consistent shrink.

04

Quality and throughput tested

Shrink quality and throughput were tested.

05

Temperature and speed optimised

Operating temperature and conveyor speed were fine-tuned.

THE RESULT

What changed after installation

Shrink wrapping became faster than fully manual packing, with a more consistent finish, fewer bottlenecks and less manual labour, at a lower first investment than a fully automatic line. Because the tunnel worked well, the customer later bought a semi-automatic sleeve sealer to work directly with it.

Faster
SHRINK WRAPPING

Quicker than fully manual packing

Shrink wrapping speed went up and bottlenecks went down.

Consistent
PRESENTATION

A better, more even shrink finish

Pack consistency and appearance improved.

Added
FURTHER ORDER

A semi-automatic sleeve sealer

The customer added a sleeve sealer to the tunnel after the first stage worked.

SEE IT RUNNING

Watch a shrink tunnel running

The clip shows a shrink tunnel like the one supplied. The playlist shows more shrink wrap applications.

SIMILAR MACHINE

A shrink tunnel like the one supplied

L-bar sealer with shrink tunnel
MACHINE TYPE

Shrink wrap machines running

Our YouTube playlist of shrink wrap applications.

Automatic powder vertical form-fill-seal packaging machine
ALL MACHINES

Machine demonstrations by type

Video demonstrations of every machine type we supply, filmed in the workshop and on site.

PLANNING A SHRINK PACKING STEP

Where to look next if you want to automate in stages

Start from your product, your pack and the output you need, as this project did.

Shrink tunnels

The machine supplied in the first stage of this project.

Sleeve sealer and shrink tunnel machines

The sealer added in the second stage, semi-automatic and fully automatic.

Bottle multipack case study

How a bottle packer shrink wraps multipacks in several sizes without an infeed conveyor.

Planning to speed up shrink wrapping?

Send us your product, your pack and the output you need. We will suggest the first step and how to add automation later, and come back with a quotation.